Huawei Echolife Hg865 Manuals

by

Nov 19, 2014  Re: Huawei Echolife Hg865 Manual Download Post by Detective » Tue Nov 18, 2014 6:37 pm Below you can download huawei echolife hg865 manual driver for Windows.

• EchoLife HG520s Home Gateway User Manual HUAWEI TECHNOLOGIES CO., LTD. • HUAWEI TECHNOLOGIES CO., LTD Huawei Administration Building Bantian, Longgang District Shenzhen, 518129 People’s Republic of China www.huawei.com 202013. • Copyright © Huawei Technologies Co., Ltd.

All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. • Avoid collision during storage, transportation and operation of the equipment. Without prior written consent from Huawei, no company or individual is allowed to decompile, disassemble, modify or reverse engineer the equipment and shall be solely responsible for any effect resulted from such action.

• The temperature of the equipment shell goes up when used for long hours. This is a normal phenomenon. Cleaning: Before cleaning the equipment, turn off the equipment and unplug the power supply. Clean the equipment shell with a piece of soft cloth. Do not spray liquid onto the equipment, to avoid damage to the internal circuit. • Table of Contents Chapter 1 Introduction.1 1.1 Functions and Features.1 1.2 Hardware Configuration.1 1.2.1 Front Panel.2 1.2.2 Rear Panel.4 1.2.3 Splitter.4 Chapter 2 Installation of the HG520s.6 2.1 Preparation..6 2.2 Connecting the HG520s.6 2.3 Establishing Configuration Environment.8 2.3.1 Parameter Configuration.8 2.3.2 Steps.8 2.4 Web Configuration Page.9. • 3.4.2 Steps.18 3.5 Configuring the PPPoA mode.20 3.6 Configuring the RFC2684B Mode.20 3.6.1 Preparation.20 3.6.2 Steps.21 3.7 Configuring the RFC2684 (IPoA) Mode.23 3.8 Configuring the Wireless Mode.23 3.8.1 Preparation.23 3.8.2 Steps.24 Chapter 4 Other Settings.27 4.1 Configuring the QoS.27 4.2 Changing the IP Address of the LAN of the HG520s.28 4.3 Changing the Administrator Password of the HG520s.29 4.4 Restoring the Default Factory Settings.29.

• Chapter 1 Introduction This chapter introduces functions and structure of the EchoLife HG520s Home Gateway (hereinafter referred to as the HG520s). 1.1 Functions and Features The HG520s is a type of Asymmetric Digital Subscriber Line (ADSL) terminal. Data, video and audio are transmitted through the common telephone line at a higher rate by the HG520s. • & Note: Figures of the front panel and the rear panel are only for your reference. 1.2.1 Front Panel Figure 1-1 shows the front panel of the HG520s.

WLAN LAN4 LAN3 LAN2 LAN1 INTERNET ADSL POWER Figure 1-1 Front panel of the HG520s Table 1-1 shows indicators in the front panel. • Indicator Color Status Description The embedded PPPoE and PPPoA dial-ups of the HG520s are successful, but there is no data transmission. There are data are being INTERNET Green Blinking transmitted in the INTERNET interface.

The HG520s is in the bridge mode or the PPPoE/PPPoA connection is not established. • 1.2.2 Rear Panel Figure 1-2 shows the rear panel of the HG520s. ON/ OFF ADSL RESET POWER LAN1 LAN2 LAN3 LAN4 Figure 1-2 Rear panel of the HG520s Table 1-2 shows interfaces and buttons in the rear panel. Table 1-2 Interfaces and Buttons in the rear panel Interface/Button Description Antenna. • same telephone line at the same time, you need an external splitter to separate the voice and data signals: LINE: Connecting to the phone jack on the wall. PHONE: Connecting to the telephone. MODEM: Connecting to the ADSL interface of the HG520s.

• Chapter 2 Installation of the HG520s This chapter introduces the installation when the HG520s is used for the first time. 2.1 Preparation Connect your computer with the HG520s through the Ethernet interfaces. Before installing the HG520s, make sure that your computer is equipped with the network card 2.2 Connecting the HG520s Figure 2-1 shows the connection of the HG520s. • Connect the HG520s as follows: Caution: Before connecting the HG520s, power off the HG520s and your computer. Connect the interfaces of the splitter with the corresponding equipment by using the telephone line. Connect the LINE interface of the splitter with the telephone jack on the wall. • 2.3 Establishing Configuration Environment You can configure the HG520s on the Web configuration page.

This section describes the process to establish the configuration environment of the HG520s. 2.3.1 Parameter Configuration Before establishing the configuration environment, set the following parameters. Table 2-1 Parameters for the configuration environment Name Description Default. The process to unselect this function is described as follows (taking Internet Explorer 6.0 as an example): (1) Start the Internet Explorer. Select Tools > Pdf viewer free download. Internet Options. To display the Internet Make sure not Options dialog box. To use the proxy server.